I recently obtained a garden unit for home and garden use…however I discovered that the unit doesn’t remove the minerals from the tap water thereby making the water undrinkable…my solution is to obtain water from Kinetico Water and run their water through your unit. I will use a height difference of 3-4 ft when running the K. water through the filter….is this enough pressure to activate your device? Is there a minimum pressure requirement for the unit to work?

These Structured Water units are not designed to remove minerals, they structure the minerals. An example of structuring is; a lump of coal and a diamond have identically the same materials, the only difference is structure. When calcium is structured, it no longer has the electro-chemical ability to adhere to itself, much less what it comes in contact with. Therefore, all that will remain is a powdered calcium which will pass through you as roughage.

For the Garden unit to effectively Structure Water any distance will work, however, the greater the pressure, the greater the efficiency. Thirty pounds per square inch (PSI) is an average pressure. If less than that, structuring will still be effective. An optimum pressure is fifty PSI +. In the near future I will have the scientific equipment to prove exactly at what pressure each device works best at, and at what level, if any, it is no longer beneficial.

Posted in: Product Information